MikroTik netPower Lite 8P 8-Port Gigabit PoE+ & 2x 10G SFP+ Outdoor Switch (White) (CSS610-8P-2S+OUT)


  • Ports: 8x Gig PoE+ & 2x 10G SFP+.
  • Power: 120W PoE budget.
  • Service: Fast shipping to Latvia, Estonia and Lithuania. 2-Year Warranty.

MIKROTIK

171,24€
€141.52 (bez PVN)

Mikrotik netPower Lite 8P (CSS610-8P-2S+OUT) | 8xBasic switching RJ-45 Ethernet ports quantity | Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000) | 2xSFP+ module slots quantity | Yes | Product colour White | Temperature sensor Yes | Power over Ethernet (PoE) Yes | 8xPower over Ethernet (PoE) ports quantity | Total Power over Ethernet (PoE) budget 120 W | Width 304 mm | Depth 212 mm | Height 71 mm

Mikrotik netPower Lite 8P (CSS610-8P-2S+OUT)

With netPower Lite 7R switch you can forget about expensive GPON base stations and optical splitters. This switch is a part of our GPEN concept – aimed to bring the speed and versatility of fiber networking while using the advantages of Ethernet. It is an easy to deploy, low-cost way for any ISP to deliver the Internet to individual apartments.

With this switch you won’t have to worry about power issues, as there are many options. netPower Lite 7R has 7 reverse PoE ports. Depending on your setup, netPower can draw the necessary power even from a single client! Ethernet port 8 can power other PoE capable devices with the same voltage as applied to the unit. There is also a DC jack and a 2-pin terminal for alternative powering.

The outdoor enclosure allows you to install this switch in all kinds of environments – from damp attics to elevator shafts and different poles with hose clamps. netPower Lite 7R has a non-blocking throughput of 28 Gbps, switching capacity of 56 Gbps and forwarding rate of 41.7 Mpps.

  • 8× Gigabit Ethernet
  • 802.3af/at PoE-Out
  • 2× 10G SFP+ uplinks
  • 24–57 V DC input
  • Built-in smart battery charger
  • 120 W total PoE-Out
  • Integrated UPS switchover
  • Temperature sensor included
SummaryMikrotik netPower Lite 8P. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000), Basic switching RJ-45 Ethernet ports quantity: 8. Networking standards: IEEE 802.3af, IEEE 802.3at. DC input voltage: 24 – 57 V. Power connector: Terminal block (2-pin). Power over Ethernet (PoE)
Unit Box Height0.095
Unit Box Length0.4
Unit Box Width0.245
Basic switching RJ-45 Ethernet ports quantity8
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Gigabit Ethernet (copper) ports quantity8
Power connectorTerminal block (2-pin)
SFP+ module slots quantity2
10G supportYes
Networking standardsIEEE 802.3af/IEEE 802.3at
International Protection (IP) codeIP54
LED indicatorsYes
Product colourWhite
Temperature sensorYes
Flash memory0.064MB
Mean time between failures (MTBF)200000h
Memory typeFlash
Operating system installedSwOS
DC input voltage24 – 57V
Power consumption (max)208W
Power over Ethernet (PoE)Yes
Power over Ethernet (PoE) ports quantity8
Total Power over Ethernet (PoE) budget120W
Operating temperature (T-T)-40 – 70°C
Depth212mm
Height71mm
Width304mm
Compliance certificatesCE/EAC/RoHS
ModelCSS610-8P-2S+OUT
Model nameMikrotik netPower Lite 8P (CSS610-8P-2S+OUT)
Units per Pallet0
Units per Shipping Box5
Unit Calculated Volume0.01269cubm
Unit Calculated Weight3.08kg
SKU: MIKROTIK-CSS610-8P-2S+OUT Category:

Based on 1 review

0.0 overall
1
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

  1. Derek Harrison –

    I recently installed this netPower Lite 8P on an outdoor pole to power my IP cameras. The SwOS interface is simple to configure, and the 10G SFP+ uplinks provide incredible speeds. Great service from apsardze24.lv, it arrived quickly and well-packaged. Highly recommended outdoor switch!

    Derek Harrison –

Does the MikroTik netPower Lite 8P include a power supply in the box?

No, the power supply is not included with this unit and must be purchased separately. You should select a 24V to 57V DC adapter or terminal power source based on the specific voltage requirements of your PoE devices.

What is the maximum power draw allowed per port on this switch?

While the total PoE budget is 120W, the maximum current per port is typically limited to 1.1A. You must ensure that the combined power consumption of all 8 connected devices at your chosen voltage does not exceed the 120W total limit.

How do I ensure the switch provides 802.3af/at PoE+ instead of Passive PoE?

The PoE output voltage is determined by the DC input voltage; to provide standard 802.3af/at power, you must use a 48V-57V power supply. Using a 24V power supply will result in 24V Passive PoE output on all ports.

Is the IP54-rated outdoor enclosure waterproof enough for direct heavy rain?

The IP54 rating protects against dust and splashing water from any direction, making it suitable for outdoor mounting under eaves or on poles. However, for extreme weather conditions or specific mounting requirements, please contact our technical support at apsardze24@gmail.com.

Are the 10G SFP+ ports compatible with standard 1.25G SFP fiber modules?

Yes, the two SFP+ slots are backwards compatible and support both 1.25G SFP and 10G SFP+ modules. This allows you to use the switch with a variety of fiber transceivers for high-speed uplinks.

How does the integrated UPS switchover feature work for power redundancy?

The device features multiple power inputs, including a DC jack and a 2-pin terminal block. This allows you to connect a primary power source and a secondary battery backup simultaneously, ensuring the switch remains operational during a power outage.

Can I run RouterOS on the MikroTik CSS610-8P-2S+OUT for advanced routing?

No, this model runs SwOS (SwitchOS), which is a lightweight operating system designed specifically for Layer 2 switching functionality. It does not support RouterOS or Layer 3 routing features like OSPF or BGP.

What kind of warranty and support does Apsardze24.lv provide for this MikroTik switch?

Apsardze24.lv provides an official 2-year warranty for this product, covering any manufacturing defects. Since our service center is located in Riga, we offer fast local technical support and efficient processing for customers in the Baltic region.
×