MIKROTIK CRS328-24P-4S+RM Managed L3 Switch with 24x Gigabit PoE+ Ports and 4x SFP+ (White) (CRS328-24P-4S+RM)

Availability:

Out of stock Check availability

Availability:

Out of stock

  • Switching Capacity: 128 Gbit/s with 24x Gigabit RJ-45 ports.
  • PoE Capability: 450W total budget, 30W per port (802.3af/at).
  • Uplink Ports: 4x 10Gbps SFP+ slots.
  • Warranty: Fast shipping to Latvia, Estonia, and Lithuania. 2-Year Warranty for all clients.

MIKROTIK

457,31€
€377.94 (bez PVN)

Out of stock

Type Managed | Switch layer L2/L3 | Quality of Service (QoS) support Yes | 24xBasic switching RJ-45 Ethernet ports quantity | Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000) | 4xSFP+ module slots quantity | Console port RJ-45 | Port mirroring Yes | Switching capacity 128 Gbit/s | Throughput 64000 Mpps | Forwarding rate 95.2 Mpps | Rack mounting Yes | Form factor 1U | Product colour White | Power source AC | Power supply included Yes | 2xNumber of power supply units | Power over Ethernet (PoE) Yes | 24xPower over Ethernet (PoE) ports quantity | Power over Ethernet (PoE) power per port 30 W | Total Power over Ethernet (PoE) budget 450 W | Width 443 mm | Depth 300 mm | Height 44 mm

CRS328-24P-4S+RM is a 28 independent port switch, it has 24 Gigabit Ethernet ports, which offer different power output options: Passive PoE, low voltage PoE, 802.3af/at (Type 1 “PoE” / Type 2 “PoE+”) with auto-sensing. PoE-Out is passed over mode B pins (4,5+)(7,8-). The four SFP+ ports provide up to 10 Gbps connectivity options via either optical fiber or Ethernet modules (not included).

CRS328-24P-4S+RM comes in a 1U rackmount case with 100-240 V AC 500 W power supply built-in. The device consumes up to 44 W leaving guaranteed 450 W (3×150 W per every 8 Ethernet ports) to power your PoE devices. Each port can provide up to 30 W of power with any power output option you choose.

The device has a “Dual boot” feature that allows you to choose between two operating systems – RouterOS or SwOS. If you prefer to have a simplified operating system with only switch specific features, use SwOS. If you would like the ability to use routing and other Layer 3 features in your CRS, use RouterOS. You can select the desired operating system from RouterOS, from SwOS or from the RouterBOOT loader settings. All the feature set comes with disruptive price, providing best price/performance on the market.

  • CPU temperature monitor
  • Current Monitor
  • PCB temperature monitor
  • Voltage Monitor
  • Mode button
SummaryMikrotik CRS328-24P-4S+RM. Switch type: Managed, Switch layer: L2/L3. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000), Basic switching RJ-45 Ethernet ports quantity: 24, Console port: RJ-45. MAC address table: 16000 entries, Switching capacity: 128 Gbit/s. Networking standards: IEEE 802.1Q, IEEE 802.3ad. Power over Ethernet (PoE). Rack mounting, Form factor: 1U
Unit Box Height0.125
Unit Box Length0.59
Unit Box Width0.39
Quality of Service (QoS) supportYes
Switch layerL2/L3
Switch typeManaged
System event logYes
Basic switching RJ-45 Ethernet ports quantity24
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Console portRJ-45
SFP+ module slots quantity4
Auto-sensingYes
Broadcast storm controlYes
Link aggregationYes
Networking standardsIEEE 802.1Q/IEEE 802.3ad
Number of VLANs4000
Port mirroringYes
VLAN supportYes
Forwarding rate95.2Mpps
Jumbo frames10218
Jumbo frames supportYes
MAC address table16000entries
Switching capacity128Gbit/s
Throughput64000Mpps
Access Control List (ACL)Yes
IGMP snoopingYes
Management protocolsSNMP
Form factor1U
LED indicatorsYes
Number of fans2fan(s)
Product colourWhite
Rack mountingYes
Built-in processorYes
Flash memory16MB
Internal memory512MB
Mean time between failures (MTBF)200000h
Processor frequency800MHz
Processor manufacturerARM
AC input voltage100 – 240V
Number of power supply units2
Power consumption (max)44W
Power sourceAC
Power supply includedYes
Power over Ethernet (PoE)Yes
Power over Ethernet (PoE) ports quantity24
Power over Ethernet (PoE) power per port30W
Power over Ethernet (PoE) type supportedPassive PoE/PoE+
Power over Ethernet (PoE) voltage26V
Total Power over Ethernet (PoE) budget450W
Operating temperature (T-T)-20 – 60°C
Depth300mm
Height44mm
Width443mm
Cables includedAC
Rack mount kitYes
Harmonized System (HS) code85176990
Units per Pallet88
Units per Shipping Box2
Unit Calculated Volume0.03088cubm
Unit Calculated Weight5.28kg
SKU: MIKROTIK-CRS328-24P-4S+RM Category:

Based on 1 review

0.0 overall
1
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

  1. David Thompson –

    I recently bought the MikroTik CRS328 from apsardze24.lv for my office setup. It’s an absolute workhorse, and the PoE budget is perfect for my cameras. Shipping was fast and the service was top-notch. Highly recommended for anyone needing a reliable managed switch that doesn’t break the bank!

    David Thompson –

I need help with initial setup and configuration, who should I contact?

For detailed technical guidance, hardware troubleshooting, or assistance with the dual-boot configuration between SwOS and RouterOS, please reach out to our technical support team at [email protected].

What is the warranty policy for the CRS328-24P-4S+RM at Apsardze24.lv?

Apsardze24.lv provides a full 2-Year Warranty for all clients on this product. Our local service center is located in Riga, ensuring that you receive professional assistance and fast resolution times.

Are the 10Gbps SFP+ ports compatible with fiber and copper modules?

Yes, the four SFP+ slots support both optical fiber modules and Ethernet SFP+ modules. Please note that these modules are not included in the box and must be purchased separately.

Does the MIKROTIK CRS328-24P-4S+RM support high-power PoE devices?

Yes, each port supports 802.3af/at (PoE/PoE+) and can provide up to 30W of power per port. The device has a total PoE budget of 450W, which is sufficient for powering a wide range of access points, cameras, and VoIP phones.

What are the specific PoE output options available on this switch?

The switch supports Passive PoE, low voltage PoE, and 802.3af/at (Type 1 and Type 2) with auto-sensing. It delivers power over mode B pins (4,5+)(7,8-).

Can I use the CRS328-24P-4S+RM as a router for my entire network?

Yes, this is a Layer 3 managed switch that supports both SwOS and RouterOS. If you require advanced routing, VPN, or firewall features, you can boot into RouterOS to utilize its full L3 capabilities.

Related products

×