Mikrotik 10G SFP+ Transceiver 850nm 300m Multi-Mode LC (S+85DLC03D)

  • Data Rate: 10000 Mbit/s (10G)
  • Distance: Up to 300m (Multi-Mode)
  • Wavelength: 850nm LC Connector
  • Warranty: Fast shipping to Latvia, Estonia and Lithuania. 2-Year Warranty.

MIKROTIK

49,60€
€40.99 (bez PVN)

Fiber optic | Maximum data transfer rate 10000 Mbit/s | Interface type SFP+ | Fiber optic connector LC | Maximum transfer distance 300 m | Wavelength 850 nm

S+85DLC03D is a 10G SFP+ transceiver with a LC connector, 850nm, for up to 300 meter Multi Mode fiber connections

Units are tested and compatible with CCR1036-8G-2S+ and CCR1036-8G-2S+EM. Units are compatible with non-MikroTik SFP devices as well.

SummaryMikrotik S+85DLC03D. SFP transceiver type: Fiber optic, Maximum data transfer rate: 10000 Mbit/s, Interface type: SFP+. Quantity per pack: 1 pc(s)
Unit Box Height0.02
Unit Box Length0.231608
Unit Box Width0.009909
Auto MDI/MDI-XNo
Fiber optic connectorLC
Interface typeSFP+
Maximum data transfer rate10000Mbit/s
Maximum transfer distance300m
Multi-mode fiber (MMF) supportedYes
SFP transceiver typeFiber optic
Wavelength850nm
Quantity per pack1pc(s)
Harmonized System (HS) code85369010
ModelMIKROTIK S+85DLC03D
Units per Shipping Box1
Unit Calculated Volume9E-06cubm
Unit Calculated Weight0.02kg
SKU: MIKROTIK-S+85DLC03D Category:

Based on 1 review

0.0 overall
1
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

  1. Marcus Thorne –

    I bought this MikroTik transceiver from Apsardze24 for my home lab setup. It works flawlessly with my switch, and the link stability is spot on for 10G speeds. Shipping was surprisingly fast, and the unit arrived in perfect condition. Truly a solid, no-nonsense purchase for anyone needing reliable fiber connectivity.

    Marcus Thorne –

What is the warranty period for the Mikrotik S+85DLC03D in the Baltics?

We provide a 2-year warranty on this product with local servicing handled at our center in Riga. Apsardze24.lv also ensures fast shipping to customers in Latvia, Estonia, and Lithuania.

Does this transceiver support Digital Diagnostic Monitoring (DDM) to check signal levels?

Yes, the S+85DLC03D supports DDM (also known as DOM), allowing you to monitor real-time metrics such as optical input/output power, temperature, and supply voltage within RouterOS.

Can the Mikrotik S+85DLC03D be used with switches from other brands like Cisco or Ubiquiti?

Yes, this module is compatible with non-MikroTik SFP+ devices as it follows standard SFF-8431 specifications. However, some brands like Cisco or HP may require specific console commands to enable the use of third-party transceivers.

How many transceivers are included in one S+85DLC03D package?

Each unit box contains one single SFP+ transceiver. Please note that for a standard fiber link between two switches, you will need to purchase two separate units.

What type of fiber optic cable is required to reach the maximum 300m distance?

To achieve the full 300-meter range at 10Gbps, you must use OM3 or OM4 Multi-Mode fiber. Using older OM1 or OM2 cabling will significantly reduce the effective transmission distance.

Does the Mikrotik S+85DLC03D support 1.25G Gigabit speeds if the port is not 10G?

This is a dedicated 10G SFP+ module designed for high-speed 10000 Mbit/s operation. For specific compatibility questions regarding auto-negotiation on legacy hardware, please contact our technical support at [email protected].

Is this the official Mikrotik version or a third-party compatible module?

Apsardze24.lv only stocks original Mikrotik hardware. This ensures the module is fully recognized by RouterOS and is eligible for official firmware support and performance optimizations.

Related products

×