,

HIKVISION DS-PM501Z8T4 Bus Input Expander for DS-PA502 with 8 Zones and 4 PGM Outputs

  • Zone Capacity: 8 wired alarm inputs for flexible intrusion detection
  • DS-PA502-128 , DS-PA502-96 , DS-PA502-64
  • PGM Outputs: 4 programmable outputs (Z5-Z8) for device control
  • Power Supply: Built-in 12VDC AUX output (500mA) for external detectors
  • Connectivity: RS-485 bus technology with extender support
  • Delivery & Warranty: Fast shipping to Latvia, as well as Estonia and Lithuania. 2-Year Warranty for all clients (Business & Private).

HikVision

60,50€
€50.00 (bez PVN)

DS-PM501Z8T4
Bus Input Expander
 8 zone inputs for intrusion detection
 4 zones configurable as PGM outputs
 1 AUX power output for detectors
 Built-in bus extender for extended bus range
 Compatible with wide range of 3rd party wired detectors
 Specification
Inputs(Zones)
Max. Zones 8
On-board zones 8
Outputs
Max. outputs 4
On-board PGM outputs 4 (Z5~Z8 programmable)
Bus interconnection
Bus-extender Yes
Bus technology Half-Duplex RS-485
Bus wiring 4-Core Alarm Cable (at least 2×0.5mm²+2×0.22mm²)
Power supply – general
Input voltage 12 VDC nominal (9~16 VDC), powered by bus
Quiescent current 80 mA @12VDC
Max. current 150 mA @12VDC
Power supply – auxiliary power output
Output capacity 12VDC nominal (9~16 VDC), 500mA
Output protection 500 mA PPTC
PGM output
Output voltage 0 VDC with switched (NPN output)
Max. current 200 mA per output
Environmental
Operating temperature -10°C to 50°C (14°F to 122°F), indoor use only
Storage temperature -20°C to 60°C (-4°F to 140°F)
Relative humidity 10% ~ 90% non-condensing
Physical
Dimension (W × H × D) 110 × 155 × 31 mm
Weight 225 g
Tamper-proof Front and Rear
Installation method Wall mount
Compliance
Electrical conformity CE, CB
EN 50131 Security Grade 2, Environmental Class II
*Specifications are measured under laboratory conditions. Actual performance may vary depending on operating
environment and application-specific factors.
 Available Model
DS-PM501Z8T4

SKU: DS-PM501Z8T4 Categories: ,

Are the 4 PGM outputs on the DS-PM501Z8T4 fully configurable?

Yes, zones 5 through 8 can be configured as programmable (PGM) outputs. These provide an NPN switched output (0VDC) with a maximum current of 200mA each, allowing you to control external devices or secondary systems.

What kind of warranty do I get when purchasing this device from Apsardze24.lv?

Apsardze24.lv provides a full 2-Year Warranty for both private and business clients on all HIKVISION hardware. Our local service center is based in Riga, ensuring that any potential hardware issues are handled quickly and professionally.

How can I extend the communication distance between the panel and the expander?

This module features a built-in bus extender, which allows you to increase the wiring distance of the RS-485 bus. Please ensure you use the recommended 4-core alarm cable (at least 2×0.5mm²+2×0.22mm²) to maintain signal integrity over longer runs.

Is this an official EU version and will it work with my local setup?

Yes, we supply only official European market versions of this hardware. If you require specific configuration assistance or have compatibility doubts regarding your existing system, please contact our technical support at [email protected].

Can I use the DS-PM501Z8T4 with any wired alarm detectors?

The expander is compatible with a wide range of 3rd party wired detectors that operate within standard electrical parameters. It includes a dedicated 12VDC AUX output with 500mA capacity to power your external sensors directly.

Does the HIKVISION DS-PM501Z8T4 require a separate power supply for the device itself?

No, the device is powered directly via the RS-485 bus from the main control panel. It operates on a nominal 12VDC input and draws between 80mA and 150mA depending on the load.

Related products

×