MikroTik CSS326-24G-2S+RM 24-Port Managed Gigabit Switch 2x 10G SFP+ 1U (White) (CSS326-24G-2S+RM)

  • Ports: 24x Gigabit RJ45 & 2x 10G SFP+.
  • System: SwOS Managed Layer 2.
  • Service: Fast shipping to Latvia, Estonia, Lithuania. 2-Year Warranty.

MIKROTIK

139,67€
€115.43 (bez PVN)

CSS326-24G-2S+RM | Type Managed | Web-based management Yes | 24xBasic switching RJ-45 Ethernet ports quantity | Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000) | 2xSFP+ module slots quantity | Yes | Port mirroring Yes | Rack mounting Yes | Form factor 1U | Product colour White | Power source DC/PoE | Power supply included Yes | 1xNumber of power supply units | Power consumption (typical) 19 W | Power over Ethernet (PoE) Yes | Width 440 mm | Depth 144 mm | Height 44 mm

SwOS powered 24 port Gigabit Ethernet switch with two SFP+ ports, wire speed connectivity with several new switching features.

The device is powered by a Marvell DX switch chip. The device is running an operating system designed specifically for MikroTik switch products – SwOS. SwOS is configurable from your web browser. It gives you all the basic functionality for a managed switch, plus more: allows to manage port-to-port forwarding, apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IP header fields. SFP cage supports both 1.25 Gb SFP and 10 Gb SFP+ modules.

SummaryMikrotik CSS326-24G-2S+RM. Switch type: Managed. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000), Basic switching RJ-45 Ethernet ports quantity: 24. Networking standards: IEEE 802.1Q. Power connector: DC-in jack. Power over Ethernet (PoE). Rack mounting, Form factor: 1U
Unit Box Height0.07
Unit Box Length0.56
Unit Box Width0.2
Switch typeManaged
Web-based managementYes
Basic switching RJ-45 Ethernet ports quantity24
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Power connectorDC-in jack
SFP+ module slots quantity2
10G supportYes
Broadcast storm controlYes
Networking standardsIEEE 802.1Q
Number of VLANs4000
Port mirroringYes
Spanning tree protocolYes
VLAN supportYes
Access Control List (ACL)Yes
MAC address filteringYes
Security algorithmsSNMP
Form factor1U
Product colourWhite
Rack mountingYes
Reset buttonYes
Built-in processorYes
Flash memory2MB
Internal memory2MB
Number of power supply units1
Power consumption (typical)19W
Power sourceDC/PoE
Power supply includedYes
Power over Ethernet (PoE)Yes
Power over Ethernet (PoE) type supportedPassive PoE
Power over Ethernet (PoE) voltage range10 – 30V
Operating temperature (T-T)-40 – 70°C
Depth144mm
Height44mm
Width440mm
ManualYes
AC adapter includedYes
Mounting brackets includedYes
Harmonized System (HS) code85176990
Model nameCSS326-24G-2S+RM
Units per Shipping Box10
Unit Calculated Volume0.00957cubm
Unit Calculated Weight1.86kg
SKU: MIKROTIK-CSS326-24G-2S+RM Category:

Based on 1 review

0.0 overall
1
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

  1. Thomas O’Sullivan –

    I recently ordered the MikroTik CSS326 from apsardze24.lv, and it’s a solid piece of kit. The 10G SFP+ ports are a game changer for my home lab setup, and the web-based SwOS makes configuration a breeze. Great service from the shop—fast delivery and the switch works perfectly out of the box.

    Thomas O’Sullivan –

Does this switch support Link Aggregation or LACP for port trunking?

For specific technical inquiries regarding Link Aggregation compatibility with third-party hardware, please contact our technical support at [email protected].

Can the CSS326-24G-2S+RM provide PoE power to my IP cameras or Access Points?

No, this switch does not have PoE-out functionality. While it can be powered via Passive PoE-in on Port 1, it cannot provide power to other connected devices.

Can I install RouterOS on the MikroTik CSS326-24G-2S+RM to use it as a router?

No, this specific model runs exclusively on SwOS (SwitchOS). It is a dedicated Layer 2 managed switch and does not support RouterOS or Layer 3 routing features like NAT or DHCP server.

Do the SFP+ ports on this switch support 1.25G SFP modules?

Yes, the two SFP+ cages are backwards compatible. They support both 1.25 Gb SFP and 10 Gb SFP+ transceiver modules for flexible fiber connectivity.

Does the package include rackmount ears for 19-inch cabinet installation?

Yes, the product comes with a set of rackmount brackets (ears) and a power adapter. It is a standard 1U form factor designed for 19-inch racks.

What is the maximum number of VLANs supported by SwOS on this device?

The CSS326-24G-2S+RM supports up to 4,000 simultaneous VLANs, allowing for complex network segmentation using the IEEE 802.1Q standard.

What is the voltage range for powering the device via Passive PoE?

The switch accepts a DC voltage range of 10V to 30V via Passive PoE on the first Ethernet port. Note that it is not compatible with 802.3af/at (48V) PoE standards.

Is the CSS326-24G-2S+RM fanless and quiet for office use?

Yes, this device features a passive cooling design with no internal fans. It operates silently, making it suitable for desktop use or quiet office environments.

What kind of local warranty support is provided for this MikroTik switch?

Apsardze24.lv provides a 2-year warranty for this product. Unlike global marketplaces, we offer local service and support directly from our center in Riga.

How do I access the configuration settings for this managed switch?

Management is performed through a web-based interface. You can access SwOS by entering the switch's IP address into any standard web browser on a device within the same network.

Related products

×