AJAX MotionCam Outdoor sensor wireless PIR detector white security external alarm system

Wireless outdoor motion detector with a photo camera for alarm verification.

MotionCam Outdoor detects intrusion from the first steps in the area and confirms it with an animated photo series. Visual verification helps to immediately clarify the situation, saving users from worries and security companies from unnecessary patrol dispatch.

Combining the best optics, fast processor, and advanced software algorithms, MotionCam Outdoor captures informative images in any weather conditions, day or night.

MotionCam Outdoor is equipped with two independent PIR sensors, whose signals are analyzed using the two-step LISA algorithm. When both sensors detect motion, LISA performs correlation and spectral analysis of the signals, which helps to immediately distinguish real threats from disturbances.

Each time MotionCam Outdoor detects motion, LISA analyzes and compares the signal forms of the two sensors in real-time. If the forms are similar, the alarm is triggered.

MotionCam Outdoor cannot be disabled discreetly, even if the system is off. The detector is equipped with masking sensors that respond to lens blocking, covering, and painting.

The hub will need less than a minute1 to detect a communication loss with the detector and inform the central monitoring station and users about the problem. The fact that MotionCam Outdoor was dismantled will be known immediately.

MotionCam Outdoor withstands heat up to +60°C and cold down to −25°C. To protect the anti-masking system sensors from rain and snow, we included a special hood.

MotionCam Outdoor uses two secure radio protocols simultaneously: Jeweller and Wings. The radio protocols operate independently of each other, each focusing on its function. Jeweller transmits alarm signals in 0.15 seconds, and thanks to Wings, the first shot from the site will be displayed in the app in less than 9 seconds.
The radio wave range is sufficient to install the detector where it will be most effective. Battery life up to 3 years reduces maintenance work.
The process of connecting and configuring MotionCam Outdoor saves installation engineers’ time in the best way. To add the detector to the system, you just need to scan the QR code with the Ajax app, assign it a name and location. Configure the device in the app in real-time, check detection areas and communication. If necessary, the detector can be disabled, or its system parameters reconfigured remotely without visiting the site.