Reliable High-Capacity Power Protection with Hikvision DS-UPS1200-R UPS
The Hikvision DS-UPS1200-R is a powerful line-interactive Uninterruptible Power Supply (UPS) designed to provide uninterrupted backup power and surge protection for security surveillance systems, network video recorders (NVR/DVR), servers, routers, and alarm control panels. Built for higher-load environments, this dependable model is available at the security systems store apsardze24.lv.
Key Advantages & Features
High Output Capacity: Offers an impressive capacity of 1200 VA / 720 W, capable of supporting multiple high-demand security and network devices simultaneously.
Dual Battery System: Equipped with two 12 V / 7 Ah lead-acid batteries, delivering an extended backup runtime of 20–25 minutes at a 200 W load.
4 Standard Schuko Outlets: Features 4 Schuko output sockets, allowing direct connection for multiple devices (such as an NVR, PoE switch, router, and monitor) without extra extension leads.
Built-in AVR (Automatic Voltage Regulation): Automatically stabilizes fluctuations across a wide input voltage range (162 VAC to 290 VAC) without switching over to battery power, preserving battery health and longevity.
Fast Transfer Time: Provides rapid switching to battery power in ≤ 10 ms, preventing unexpected shutdowns, equipment reboots, and data corruption.
Comprehensive Multi-Stage Protection: Built-in safeguards protect connected hardware against overloads, short circuits, electrical surges, and deep battery discharge.
Super Fast Charging: Recharges the dual-battery configuration back to 90% capacity within 6 to 8 hours.
Technical Specifications
Model: DS-UPS1200-R
Capacity: 1200 VA / 720 W
Input Voltage Range:
162 VAC to 268 VAC (220 V nominal)
170 VAC to 280 VAC (230 V nominal)
177 VAC to 290 VAC (240 V nominal)
Input Frequency: 50/60 Hz (self-adaptive)
Output Voltage Range: 220/230 VAC ± 10%
Output Frequency: 50/60 Hz ± 0.5 Hz (self-adaptive)
Waveform: Simulated Sine Wave
Transfer Time: ≤ 10 ms
Number & Type of Outlets: 4 × Schuko
Battery Configuration: 12 V / 7 Ah × 2 (lead-acid batteries)
Recharge Time: 6–8 hours to recover to 90% capacity
Communication Ports: None
Indicators & Audible Alarms
Line Mode (Mains Operation): Solid green LED indicator.
Battery Mode: Flashing yellow LED indicator with an audible beep every 10 seconds.
Low Battery: Audible beep sounding every second.
Overload: Audible beep sounding every 0.5 seconds.
Fault Mode: Solid red LED indicator with a continuous audible tone.
Environmental & Physical Specifications
Operating Temperature: 0 °C to 40 °C (32 °F to 104 °F)
Operating Humidity: 0% to 90% (non-condensing)
Dimensions (W × D × H): 350 mm × 149 mm × 162 mm (13.78″ × 5.87″ × 6.38″)
Weight: 8.9 kg
.webp)




