DS-PA502-64 HIKVISION AX Hybrid PRO G2 Alarm Control Panel 64 Zones HUB

DS-PA502-64
AX HYBRID PROG2 Control Panel Unit
 64 zones and 64 outputs
 32 areas
 1 installer, 1 admin, 100 operators
 Dual bus, up to 32 bus devices per bus
 Dual-path notification to ARC, support ARC redundancy
 Support LAN, Wi-Fi, support optional PSTN/GPRS/4G Communicator
 Support 4-ch onboard IPC video verification cache
 Support ISUP, OTAP protocols
 EN50131 Grade 2
 Specification
Inputs(Zones)
Max. Zones 64
On-board zones 8
Bus PIR-cameras 24
Outputs
Max. outputs 64
On-board PGM outputs 2
On-board relay outputs 2
Auxiliary Power Output 1
On-board sounder output 1
Areas
Area 32
Peripherals
Keypads 16
8-zone expanders 8
8-relay expanders 16
Wireless receivers 8
Power supply units 15
Video verification
Network camera channels 32
Video verification network
camera channels
Up to 4 (1080p)
Video verification clip duration 7 seconds
Pre-record 2 or 5 seconds
Programming
Automation scenarios 256
Event logs
Event log records 4950 including 1000 mandatory in flash memory
Users
Admin 1
Installer 1
Max. operators 100
User (Cloud) 64
Authorization devices
Keyfobs 64
Tags 100
Bus interconnection
Bus ports 2
Bus technology Half-Duplex RS-485
Bus wiring 4-Core Alarm Cable (at least 2 × 0.5 mm² + 2 × 0.22 mm²)
Bus topologies Daisy Chain, Cascade, Star, Ring
Range per Bus
Up to 500m (Up to 7.5km with bus-extenders, Up to 4km in loop mode, Up to 1km in
compatible mode)
Bus-extenders per Bus Up to 15 pcs, 500m in between
Devices per Bus 32
Communication interfaces
LAN/Ethernet 10/100 Mbps self-adaptive
Wi-Fi 802.11b/g/n (2.4GHz)
GPRS Compatible with DS-PC501G(Optional)
4G/LTE Compatible with DS-PC502S (Optional)
PSTN Compatible with DS-PM2-P(Optional)
ARC connectivity
ARCs 4
Signaling protocols ISUP, Contact ID(PSTN), SIA DC-09, CSV-IP, OTAP
Ack. operation Pass-through
ATS Categories SP3, DP2 (with optional GPRS/4G communicator)
3rd party communicator Compatible with FSK, RDC, IDS modules
Power supply – general
PS type Type A
Quiescent current 130 mA @15VDC (when on battery)
Power supply – primary power supply
Mains Input 100-240VAC 50/60Hz, 0.3A
Power supply capacity 15.3 VDC 2.5 A (0.5 A dedicated to battery)
Power supply – auxiliary power supply
Battery pack 1 × rechargeable sealed lead-acid (SLA) battery (not included by default)
Battery capacity 12VDC, up to 7Ah (≥ 5600 mAh in charged state)
Recommended battery OUTDO OT7-12 (7Ah), Yuasa NP7-12FR (7Ah)
Battery stand-by Up to 12 hrs
Recharge period 24 hrs to 80% (5600 mAh)
Floating voltage 13.8VDC
Low energy voltage 11.60±0.5 V (Restore when rise above 11.74±0.5 V)
Cut-off voltage 11.0 VDC for deep-discharge protection
Power supply – auxiliary power output
Output capacity Nominal 14.5VDC 1.5A, range 10.7-15 VDC with up to 120 mV ripple (Vpp)
Output protection 1.7 A resettable eFuse
Power supply – Bus power output
Output capacity
Nominal 14.5VDC, range 10.7-15 VDC with up to 120 mV ripple (Vpp), max. 20W
(shared AUX power output)
Output protection (Shared AUX power output)
Power supply – sounder power output
Output capacity Nominal 14.5VDC 1.0A, range 10.7-15 VDC with up to 120 mV ripple (Vpp)
Output protection 1.3 A resettable eFuse
PGM output
Output voltage 0 VDC with switched (NPN output)
Max. current 200 mA per output
Relay output
Relay output 3A 30VDC, 1A 250VAC
Environmental
Operating temperature -10°C to 50°C (14°F to 122°F), indoor use only
Storage temperature -20°C to 60°C (-4°F to 140°F)
Relative humidity 10% ~ 90% non-condensing
Physical
Dimension (W × H × D) 231 × 133 × 44 mm
Weight 488 g
Compliance
Electrical conformity CE, CB
EN 50131 Security Grade 2, Environmental Class II
*Specifications are measured under laboratory conditions. Actual performance may vary depending on operating
environment and application-specific factors.
*Star topology is supported only in compatible mode or via a bus hub. Connecting multiple branch es to a single bus port may
significantly reduce bus range.
*Quiescent current is specified in Wi-Fi standby mode, with Ethernet and all communicators disconnected.
*Battery standby duration applies when all functions are operational and the load connected to the AUX-/AUX+ terminals
does not exceed 336 mA.
*ARC signalling complies with SIA IP Reporting (UDP/TCP-2013) as per ANSI/SIA DC-09-2013. The control panel supports
ADM-CID and SIA-DCS protocols defined in SIA DC-07-2001.04. When transmission messages are AES-encrypted, a “*” is
prefixed to the protocol name (e.g., *ADM-CID, *SIA-DCS). Supported encryption levels include AES-128, AES-192, and AES-256.
All specifications are measured under laboratory conditions. Actual performance may vary depending on o perating
environment and application-specific factors.
 Dimension
 Available Model
DS-PA502-64
 Accessory
 Optional
DS-PZ501SHL-P DS-PM2-P DS-PT061 DS-PC502S(EU) DS-PC502S(AU)
DS-PZ501SHL-M DS-PC501G

Hangzhou Hikvision Digital Technology Co., Ltd.