MikroTik XS+31LC10D Transceiver 25G/10G/1G 10km SM SFP28 (Silver) (XS+31LC10D)

  • Speed: 25G/10G/1G Multi-rate.
  • Range: 10km Single-Mode.
  • Delivery: Fast shipping to LV, EE, LT. 2-Year Warranty.

MIKROTIK

119,28€
€98.58 (bez PVN)

Fiber optic | Maximum data transfer rate 25000 Mbit/s | Interface type SFP28 | Fiber optic connector LC (UPC) | Maximum transfer distance 10000 m | Wavelength 1310 nm

This unit is a direct upgrade of our previous 10G SFP+ 10 km module: more functionality for the same price. We have added 25G SFP28 support – so you can use one module in all your setups. Perfect for the CCR2004-1G-12S+2XS connectivity router and any other multiport devices.

SummaryMikrotik XS+31LC10D. SFP transceiver type: Fiber optic, Maximum data transfer rate: 25000 Mbit/s, Interface type: SFP28. Product colour: Stainless steel, Mean time between failures (MTBF): 200000 h. Quantity per pack: 1 pc(s)
Unit Box Height0.03
Unit Box Length0.11
Unit Box Width0.05
Fiber optic connectorLC (UPC)
Interface typeSFP28
Maximum data transfer rate25000Mbit/s
Maximum transfer distance10000m
SFP transceiver typeFiber optic
Wavelength1310nm
Mean time between failures (MTBF)200000h
Product colourStainless steel
Quantity per pack1pc(s)
Harmonized System (HS) code85369010
Units per Shipping Box1
Unit Calculated Volume0.000165cubm
Unit Calculated Weight0.01kg
SKU: MIKROTIK-XS+31LC10D Category:

Based on 1 review

0.0 overall
1
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

  1. Julian Varga –

    I bought this MikroTik 25G transceiver for my office setup, and it works like a charm. The installation was a breeze, and it’s truly a versatile upgrade for my network. Apsardze24 delivered it quickly and everything arrived in perfect condition. I’m very satisfied with the purchase and the seamless service.

    Julian Varga –

Is this an official EU version of the MikroTik XS+31LC10D?

Yes, Apsardze24.lv stocks the official version intended for the European market. It is fully compatible with all MikroTik devices, including the CCR2004 and CCR2116 series, and supports official firmware updates.

Does this module support Digital Diagnostic Monitoring (DDM)?

Yes, it supports DDM, allowing you to monitor critical parameters such as optical output power, input power, temperature, and supply voltage in real-time through your router's interface.

What type of fiber optic cable is required for the XS+31LC10D to reach 10km?

You must use Single-Mode Fiber (SMF) with a 1310nm wavelength to achieve the maximum 10km range. Using Multimode fiber (OM3/OM4) with this module is not supported and will result in link failure.

Does the package include a fiber patch cord?

No, the package contains one XS+31LC10D transceiver module only. Fiber optic patch cables must be purchased separately according to the length and connector type required for your installation.

What is the expected lifespan and reliability of this 25G transceiver?

The module is built for long-term industrial use with a Mean Time Between Failures (MTBF) of 200,000 hours. The stainless steel housing ensures durability and efficient heat dissipation during high-speed data transfers.

How is the warranty handled if the module fails during operation?

Apsardze24.lv provides a 2-year warranty on this product. Because our service center is located locally in Riga, we can offer faster diagnostics and replacements compared to international marketplaces.

Can I use an APC green connector with this SFP28 module?

No, this module is designed for LC/UPC (blue) connectors. Connecting an APC (angled physical contact) connector will cause significant signal reflection and may physically damage the transceiver's optical interface.

Is the MikroTik XS+31LC10D compatible with non-MikroTik hardware like Cisco or Ubiquiti?

MikroTik modules generally do not use vendor locking, making them widely compatible; however, for confirmation regarding specific third-party switch models, please contact our technical support at [email protected].

Can the MikroTik XS+31LC10D work in a standard 10G SFP+ port?

Yes, this transceiver is fully backwards compatible. It is designed to operate in SFP28 (25G), SFP+ (10G), and SFP (1.25G) ports, providing a versatile upgrade path for your networking hardware.

Does this transceiver automatically adjust between 25G, 10G, and 1G speeds?

While the hardware supports multi-rate speeds, the actual link speed is typically determined by the host device's port configuration. In some cases, you may need to manually select the desired speed (1G, 10G, or 25G) within RouterOS settings.

Related products

×