-14%

MikroTik GPEN11 Gigabit PoE Injector Wall-Mountable (White) (GPEN11)

  • Type: Gigabit Passive PoE Injector
  • Range: 12-57V DC Input
  • Mount: Wall-mountable
  • Fast shipping to Latvia, Estonia and Lithuania. 2-Year Warranty.

MIKROTIK

13,04€ 15,23€
€10.78 (bez PVN)

Operating temperature range -40..+70C | Colour White

The GPEN11 is a power injector that can be mounted on a wall, and will power your uplink devices with PoE power. The GPEN11 is part of the GPEN (Gigabit Passive Ethernet Network) concept, which aims to replace GPON installations with lower cost and more easy to deploy ethernet alternative.
 

The MikroTik GPEN11 is a wall-mountable power injector designed as a key component of MikroTik's GPEN (Gigabit Passive Ethernet Network) concept.

In short:

  • Power Injector: Its primary function is to deliver Power over Ethernet (PoE) to connected uplink devices.

  • GPEN Concept: It's part of MikroTik's initiative to offer a more cost-effective and easier-to-deploy alternative to traditional GPON (Gigabit Passive Optical Network) installations by leveraging standard Ethernet.

  • Connectivity: It features two Gigabit Ethernet ports, with one typically providing Passive PoE output to power a device (like an outdoor wireless unit or another network switch).

  • Flexible Powering: It supports a wide input voltage range (12-57V DC), allowing flexibility in power sources.

  • Wall-Mountable: Designed for easy installation inside customer premises, often next to a Wi-Fi router. It even has a designated space for an ISP sticker.

    Essentially, the GPEN11 allows ISPs or network administrators to power remote Ethernet devices over a single cable, simplifying deployments and reducing infrastructure costs, particularly in scenarios where GPON might be overkill or too expensive.

Unit Box Height0.115
Unit Box Length0.125
Unit Box Width0.03
Operating temperature range-40..+70C
ColourWhite
Units per Shipping Box1
Unit Calculated Volume0.0004312cubm
Product Net Weight0.08kg
Unit Calculated Weight0.12kg
SKU: MIKROTIK-GPEN11 Category:

Based on 1 review

0.0 overall
1
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

  1. Christopher Bennett –

    This PoE injector is exactly what I needed for my home setup. The GPEN11 is easy to mount on the wall and works flawlessly with my uplink devices. I’m really impressed with the service from apsardze24.lv; the shipping was very fast. It’s a solid, well-built product that simplifies my cabling significantly.

    Christopher Bennett –

What is the maximum cable length supported by the GPEN11 for PoE delivery?

The effective distance depends on the input voltage and the power draw of your device due to voltage drop over Ethernet cables. For a precise calculation based on your specific deployment, please contact our technical support at [email protected].

Can I use the MikroTik GPEN11 to power standard 802.3af/at PoE devices?

No, the GPEN11 is a passive PoE injector and does not support the 802.3af/at active handshake protocol. It will only power devices that are compatible with passive PoE within the 12-57V range.

Will the MikroTik GPEN11 (GPEN11) reduce my internet connection speed?

No, this injector features two Gigabit Ethernet ports (10/100/1000 Mbps), ensuring that your high-speed data transmission is not throttled while power is being added to the cable.

Can this injector be used with non-MikroTik hardware?

Yes, as long as the receiving device supports passive PoE and the voltage supplied to the GPEN11 matches the device's requirements, it is compatible with any brand of networking equipment.

Is the GPEN11 suitable for installation in an outdoor junction box?

Yes, with an operating temperature range of -40°C to +70°C, the GPEN11 can withstand extreme environments. However, it is not waterproof and must be housed in a weather-resistant enclosure if installed outdoors.

How is the MikroTik GPEN11 mounted to a wall?

The unit features a snap-on plastic cover that hides the mounting screws. You can easily screw the baseplate to a wall or surface, providing a clean and professional-looking installation inside a customer's home or office.

What kind of warranty and local support is available for the GPEN11?

Apsardze24.lv provides a 2-Year Warranty for the GPEN11, with all technical service and support handled locally at our facility in Riga. This ensures much faster turnaround times compared to international marketplaces.

Where can I place my company contact information on the device?

The GPEN11 is designed for ISP deployments and features a dedicated flat space on the front cover for an ISP branding or service sticker. This makes it easy for customers at Apsardze24.lv to identify who to call for network support.

Does the GPEN11 support PoE-in and PoE-out simultaneously?

No, the GPEN11 is designed to take power from a DC jack and inject it into one of the Ethernet ports (PoE-out). It does not receive power via PoE-in from another source.

Does the MikroTik GPEN11 include a power adapter in the package?

No, the GPEN11 is sold as a standalone injector unit and does not include a power supply. You must use a DC power adapter (12-57V) that matches the voltage requirements of the device you intend to power.

Related products

×